DETAILED OCCUPATION DATA
51-7041 Sawing Machine Setters, Operators, and Tenders, Wood
Occupational Description:
Set up, operate, or tend wood sawing machines. May operate CNC equipment. Includes lead sawyers.| Percentiles | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Geography | Employment | Emp SE* | Mean | Mean SE* | 10th | 25th | Median | 75th | 90th |
| Minnesota | 850 | 126 | $14.73/hr | $0.37/hr | $10.56/hr | $12.13/hr | $14.26/hr | $17.00/hr | $19.72/hr |
| U S | 37,620 | 978 | $13.47/hr | $0.09/hr | $8.63/hr | $10.16/hr | $12.87/hr | $16.16/hr | $19.15/hr |
| *SE = Standard error, a measure of the statistical reliability of the estimate. | |||||||||
| ||||||||||||||||||||||||||||||||||||||||
| Occupation (click title for details) | OES | Projections | |
|---|---|---|---|
| Employment | Median Wage | % Change - | |
| Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic | 190 | $14.19/hr | N/A |
| Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic | 70 | $16.15/hr | N/A |
| Stationary Engineers and Boiler Operators | 50 | $24.77/hr | N/A |
| Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders | 30 | $12.53/hr | N/A |
| Cutting and Slicing Machine Setters, Operators, and Tenders | N/A | $14.42/hr | N/A |
Tasks for Sawing Machine Setters, Operators, and Tenders, Wood
- Selects knives to achieve specified diameter of cut, or installs bit and dado saw according to work ticket.
- Aligns and bolts knives in cutterhead and screws it on spindle, using wrenches.
- Adjusts angle of table by turning handwheel, and bolts or clamps holding jigs to table.
- Places stock in jig and pushes table containing stock into saw or lays stock on conveyor that carries it into machine.
- Pulls table back against stops and depresses pedal to advance cutterhead that shapes end of stock.
- Operates and tends saws and machines to cut stock and to adjust machine speed and tension, moving levers and handwheels.
- Guides workpiece against saw or saw over workpiece or operates automatic feeding device to guide cuts.
- Operates panelboard of saw and conveyor system to cut stock to specified dimensions and to move stock through process.
- Trims defects from stock or workpiece to straighten rough edges of lumber, using circular power saw.
- Turns knobs, handwheels, setscrews, and panel controls, or uses hand tools to position and adjust cutting stops and guides.
- Adjusts saw blades by turning handwheels, pressing pedals, levers, and panel buttons, or using wrenches and rulers.
- Observes approaching lumber on conveyor to determine cut that will produce highest grade.
- Determines sawing blade, type and grade of stock needed, and cutting procedures, according to work order or supervisor's instructions.
- Mounts and bolts sawing blade or attachments to machine shaft and turns handwheels to set blade tension.
- Positions and clamps stock on table, conveyor, or carriage, using hoists, guides, stops, dogs, wedges, and wrench.
- Moves machine table to specified angle and height by turning handwheels, cranks, or knobs.
- Measures workpiece to mark for cuts and to verify accuracy of cuts, using ruler, square, or caliper rule.
- Clears machine jams, using hand tools.
- Unclamps and removes finished workpiece from table.
- Sharpens blades or replaces defective or worn blades and bands, using hand tools.
- Inspects stock for imperfections and estimates grade or quality of stock or workpiece.
- Lubricates and cleans machines, using wrench, grease gun, and solvents.
- Unloads and rolls logs from truck to sawmill deck or to carriage or moves logs in pond, using pike pole.
- Counts, sorts, and stacks finished workpieces and disposes of waste material.